Archive: Oct 2024

Does Your Electrical Installation Need to Pass Safety Inspection?

Leave a Comment

Why install conduit that must be replaced if it does not pass safety inspection?

Instead, choose and install UL listed conduit and fittings to make sure your wiring protection meets electrical safety code requirements.

Make your safety inspector’s job easier by using products that show wiring is protected to national safety standards. The UL and CSA marks on conduit and fittings show they meet or surpass safety requirements.

Conduit Safety Testing

UL listed conduit is independently tested and approved to meet National Electrical Code (NEC) safety standards.
Our flexible metal conduit is consistently tested to UL Standard 360 for Liquid Tight Flexible Metal Conduit:

  • Resistance Test
  • Fault Current Test
  • Impact Test
  • Tension Test
  • Crushing Test
  • Pipe Stiffness for Direct Burial
  • Flexibility Test
  • Zinc Coating Test
  • Vertical Flame Test
  • Physical Properties of Thermoplastic Jacket
  • Deformation Test
  • Mechanical Water Absorption Test
  • Moisture Penetration Test
  • Sunlight Resistance Test
  • Secureness of Fittings Test
  • Test for Durability of Ink Printing

Our flexible non-metallic conduit is consistently tested to UL Standard 1660 for Liquid Tight Flexible Non-Metallic Conduit.

ANACONDA SEALTITE® Conduit, Tested and Proven since 1952

ANAMET Electrical, Inc. tests our UL Listed, CSA Approved conduit to:

  • CSA Standard C22.2
  • UL Standard 360 for Liquid Tight Flexible Metal Conduit (Type UA, SS-UA, ASUA, UVUA, CW, HTUA, SS-HTUA, ZHUA and SS-ZHUA conduit)
  • UL Standard 1660 for Liquid Tight Flexible Non-Metallic Conduit (Type CNP and NMUA conduit)
  • National Electrical Code (NEC) specifications

Type UA, ASUA, CW, HTUA, ZHUA, CNP and NMUA conduit conform to UL and CSA requirements.

Type FGUA conduit conforms to UL and NSF requirements.

Here are available UL listed ANACONDA SEALTITE® conduit options.

UL Listed Fittings

Make sure fittings are UL listed, too. Fittings must pass UL 514B test procedures to bear the cULus mark for approved use in Canada and the USA.

Here are available UL listed SEALTITE® fitting options.